Design and Build a Multilevel Mace Nutmeg Dryer to Improve the People's Economy

Authors

  • Ihsan Ihsan Politeknik Aceh Selatan, Indonesia
  • Dirja Nur Ilham Politeknik Aceh Selatan https://orcid.org/0000-0001-9910-2661
  • Reza Ade Putra Universitas Islam Negeri Raden Patah, Palembang, Indonesia
  • Rudi Arif Candra Politeknik Aceh Selatan, Indonesia
  • Arie Budiansyah Universitas Syiah Kuala, Indonesia

DOI:

10.33395/sinkron.v6i1.11171

Keywords:

Arduino Uno, Heating element, DHT11, Fan Motor, Relay

Abstract

Nutmeg is a source of income for some people in South Aceh, and some types of nutmeg, like mace nutmeg, are of better quality. Mace nutmeg is also an agricultural community with great economic value and benefits for humans, as it can be processed into spices and herbs. A range of products includes nutmeg oil and medicines. The harvesting and drying of mace nutmeg, which is still considered a problem by nutmeg growers, cannot be isolated from the processing of the basic ingredients. The natural process of drying mace nutmeg involves the use of sunshine, which necessitates a considerable drying time. Therefore nutmeg farmers frequently complain of erratic weather, especially during the wet season. The constant rain can cause the mace to rot, causing the nutmeg farming community's revenue to become unstable. Methods and steps of research work starting from the study of literature, determination of design specifications, hardware design, software design, toolmaking, tool testing.Good results were reached with the dryness of the mace nutmeg, which can be adjusted, and without putting into account the weather in the drying process, which is usually done with the heat of the sun, per the results of the testing of the designed tools.The average dryness of mace nutmeg is at a temperature of 45 percent with a time of 4 hours and a capacity of 100 grams; according to the test results of the automatic mace drying machine, it produces 50 grams of dry mace.

 

GS Cited Analysis

Downloads

Download data is not yet available.

References

Addari, A. S. (2019). Rancang bangun alat kendali penjemur ikan asin bagi para nelayan. SKRIPSI.

Ardi, M., & Amri, H. (2019). Analisa Rancang Bangun Alat Pengering Pakaian Otomatis. Journal of Electrical Electronic Control and Automotive Engineering (JEECAE), 4(1), 253–256.

Balkhaya, B., Ilham, D. N., Candra, R. A., Hardisal, H., & Hasbaini, H. (2020). Designing an Arduino-based Automatic Cocoa Fermentation Tool. SinkrOn, 5(1), 92–99. https://doi.org/10.33395/sinkron.v5i1.10611

Candra, R. A., Ilham, D. N., Hardisal, H., & Sriwahyuni, S. (2019). Light Control Design by Using Social Media Telegram Applications Based on Internet Of Things (IOT). SinkrOn, 3(2), 200. https://doi.org/10.33395/sinkron.v3i2.10094

Candra, R. A., Saputra, D. S., Ilham, D. N., Setiawan, H., & Hardisal, H. (2020). The Infusion of Notification Design With an Application of Social Media Based on a Internet of Things (IOT). SinkrOn, 5(1), 129. https://doi.org/10.33395/sinkron.v5i1.10610

Ekayana, A. A. G. (2016). RANCANG BANGUN ALAT PENGERING RUMPUT LAUT BERBASIS MIKROKONTROLER ARDUINO UNO. JPTK, UNDIKSHA, 13(1), 1–12.

Feriska, A., & Triyanto, D. (2017). Rancang Bangun Penjemur dan Pengering Pakaian Otomatis Berbasis Mikrokontroler. 05(2).

Hakim, E. Z. R., Hasan, H., & Syukriyadin. (2017). Perancangan Mesin Pengering Hasil Pertanian Secara Konveksi dengan Elemen Pemanas Infrared Berbasis Mikrokontroler Arduino Uno dengan Sensor DS18B20. 2(3), 16–20.

Hasan, S., Herlina, A., & Basri, M. H. (2019). Prototipe Mesin Pengering Biji Jagung dengan Sistem Kendali Logika dan Arduino Mega 2560. 1(3), 108–117. https://doi.org/10.12928/biste.v1i3.1099

Ihsan, I., Ilham, D. N., Candra, R. A., Yunan, A., & Hardisal, H. (2020). Design of an Automatic Water Pump on a Traditional Boat. SinkrOn, 5(1), 100. https://doi.org/10.33395/sinkron.v5i1.10635

Ikhsan, M. (2019). RANCANG BANGUN ALAT PENGERING GABAH OTOMATIS MENGGUNAKAN SENSOR BERAT BERBASIS ARDUINO UNO. Laporan Tugas Akhir.

Ilham, D. N., Hardisal, H., Balkhaya, B., Candra, R. A., & Sipahutar, E. (2019). Heart Rate Monitoring and Stimulation with the Internet of Thing-Based (IoT) Alquran Recitation. SinkrOn, 4(1), 221. https://doi.org/10.33395/sinkron.v4i1.10392

Ilham, D. N., Satria, E., Anugreni, F., Candra, R. A., & Kusumo, H. N. R. A. (2021). Rain Monitoring System for Nutmeg Drying Based on Internet of Things. Journal of Computer Networks, Architecture, and High-Performance Computing, 3(1), 52–57. https://doi.org/10.47709/cnahpc.v3i1.933

Launda, A. P., Mamahit, D. J., & Allo, E. K. (2017). Prototipe System Pengering Biji Pala Berbasis Mikrokontroler Arduino Uno. 6(3), 141–147.

Maulana, R., Jamaluddin, & Finawan, A. (2018). Rancang Bangun Pengendalian Proses pada Sistem Pengering Biji Kopi Berbasis mikrokontroler. Laporan Tugas Akhir, 2(2).

Ramadani, F., Triyanto, D., & Suhardi. (2018). PROTOTYPE ALAT PENGONTROL DAN PENGERING BENIH KEDELAI BERBASIS ARDUINO DENGAN ANTARMUKA WEBSITE. 06(03), 107–117.

Rizkianto, A. B. (2019). Rancang Bangun Pengering sepatu Berdasarkan Kelembaban Menggunakan Metode PID. Laporan Tugas Akhir.

Supriyono, H., Ariwibowo, S., & Irsyadi, F. Y. Al. (2015). RANCANG-BANGUN PENGERING PANILI OTOMATIS BERBASIS MIKROKONTROLER. Simposium Nasional RAPI XIV - 2015 FT UMS, 50–56.

Downloads


Crossmark Updates

How to Cite

Ihsan, I., Ilham, D. N., Putra, R. A., Candra, R. A., & Budiansyah, A. (2021). Design and Build a Multilevel Mace Nutmeg Dryer to Improve the People’s Economy. Sinkron : Jurnal Dan Penelitian Teknik Informatika, 5(2B), 107-112. https://doi.org/10.33395/sinkron.v6i1.11171

Issue

Vol. 5 No. 2B (2021): Article Research October 2021

Section

Articles

License

Copyright (c) 2021 Ihsan Ihsan, Dirja Nur Ilham, Reza Ade Putra, Rudi Arif Candra, Arie Budiansyah

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

Most read articles by the same author(s)