Analysis Of Improving Service Quality At The Ssctelkom Surabaya Institute Of Technology Using The Lean Six Sigma Method
DOI:
10.33395/sinkron.v8i3.13657Keywords:
Student service centre (SSC), Lean six sigma, value stream mapping (VSM), Qr Code)Abstract
Student Service Centre (SSC) is a center that provides services and information to active students at InstitutTeknologi Telkom Surabaya (ITTS). ITTS provides SSC with academic, student, and faculty services to support its students' academic and non-academic development. One of the main services provided by SSC is the Active Certificate. However, SSC users need help obtaining the letter. This study aims to measure the quality of Active Certificate services using the Lean Six Sigma method and provide recommendations for improvement. The results showed that the quality of SSC services still needs to be improved, with a DPMO value of 289686, a sigma value of 2.07, and the highest negative gap in the Responsiveness dimension. The total Non Value Added time was obtained at 10 hours 31 minutes, and the total Value Added time was 4 hours 8 minutes. Proposed improvements include the deployment of QR Codes to provide information on document requirements and using Value Stream Mapping (VSM) to reduce the time spent on non-value added. Lean Six Sigma method can reduce the total value-added time and improve the efficiency of SSC services.
Downloads
References
S. Maulidiyah, 2021. Analisis Dan Perbaikan Kualitas Pelayanan Pusat Layanan Terpadu (Plt) Di Perguruan Tinggi XYZ Dengan Metode Servqual Dan Kano Model p. 6.
F. D. Bahiyyah and U. B. Wibowo,2019. Analisis Kualitas Layanan Akademik Madrasah Dengan Metode Servqual Pada Pendidik Dan Tenaga Kependidikan,” Kelola J. Manaj. Pendidik., vol. 6, no. 1, pp. 1–10, , doi: 10.24246/j.jk.2019.v6.i1.p1-10.
R. Astuti, 2001. Analisis pelayanan akademik dengan menggunakan metode service quality dan six sigma,” no. 1988, pp. 43–50, 2001.
N. Wulandari and A. Sauddin. Analisis Kualitas Layanan Pada Fakultas Sains Dan Teknologi Menggunakan Metode Zone Of Tolerance, Kano Dan Lean Six Sigma , (Studi Kasus : Fakultas Sains Dan Teknologi Universitas Islam Negeri Alauddin Makassar) ",” pp. 81–90.
R. Ibnas, T. A. Nurman, M. Ridwan, and ..., “Pendekatan Sixsigma Dalam Mengukur Kualitas Layanan Program Studi,” J. MSA (Matematika …, 2019.
D. Masruroh, “Peningkatan Kualitas Lembaga Pendidikan Melalui Pendekatan Lean Six Sigma,” vol. 2, no. 1, pp. 23–28, 2023.
V. Dinnia and I. Nasrudin, “Upaya Peningkatan Kualitas Layanan Jasa Pendidikan Terhadap Kepuasan Mahasiswa Fakultas Teknik USB YPKP dengan Pendekatan Lean Six Sigma,” Rekayasa Ind. dan Mesin, vol. 2, no. 2, p. 23, 2021, doi: 10.32897/retims.2021.2.2.1225.
Ittelkom-sby, “Yuk Cari Tahu Tentang SSC,” https://ittelkom-sby.ac.id/ssc/, 2023.
W. Anggraini, I. Kusumanto, E. G. Permata, and M. Yola, “Pendekatan Lean Services Untuk Perbaikan Pelayanan Administrasi Akademik Perguruan Tinggi,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 6, no. 1, p. 21, 2020, doi: 10.24014/jti.v6i1.5246.
R. A. Tambunan, N. U. Handayani, and D. Puspitasari, “Penerapan Lean Manufacturing menggunakan Value Stream Mapping (VSM) untuk Identifikasi Waste & Performance Improvement Pada UKM ‘Shoes and Care,’” Ind. Eng. Online J., vol. 6, no. 4, pp. 1–6, 2017.
E. Haryanto and B. P. Ichtiarto, “Analisa Penurunan Cacat (Defect) Cat Bintik Debu Dengan Metodologi Six Sigma Pada Proses Painting Produk Fuel Tank Di Pt. Sso Tangerang,” J. PASTI, vol. 13, no. 3, p. 326, 2020, doi: 10.22441/pasti.2019.v13i3.009.
A. K. Layanan, “Analisa Kualitas Layanan Website Elearning MyBEST UBSI Menggunakan SERVQUAL.,” vol. 2, no. 3, pp. 161–173, 2021.
Novitaningsih, “Analisis Profitabilitas usaha tani padi organik di paguyuban Al- Barokah,” pp. 1–23, 2019.
F. Zulfikarijah and T. Khwarazmita, “Service Blueprinting Program Magang Mahasiswa Bersertifikat (PMMB) di UMM,” pp. 136–140, 2019.
Downloads
|
How to Cite
Issue
Section
License
Copyright (c) 2024 Ahmad Nur Rosyid, Rizqa Amelia Zunaidi, Aufar Fikri Dimyati
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Muhammad Khoiruddin harahap
Google Scholar 
Moraref
PKP Index
Garuda Kemdikbud
Indonesia OneSearch
OCLC Worldcat
Dimensions
Index Copernicus
Scilit
